One fine day you wake up and head to the kitchen for morning tea and find water dripping from your sink. Feels nasty! Doesn’t it?
Well, kitchen plumbing is among the less featured things on our priority lists. Faucets, sinks, and pipelines are the integral parts of every common household and need to be taken care of. Calling a plumber every time something goes wrong is not always the wisest thing to do. We should be self-reliant at least for some common problems faced in the kitchen. Here’s this blog with some Do-It-Yourself tips which a plumber Toronto will be proud of.
- Being aware of what you can do’ is the first thing to look at while approaching a plumbing task. Though there are a lot of tasks which can be performed by applying simple methods, there are numerous other tasks as which require a professional aid.
- Two things to be always kept in mind before proceeding with any project: Safety and Convenience. These can never be compromised.
- The main water supply needs to be turned off while plumbing.
- Keeping yourself away from any electrical circuits and appliances is an important part of safety.
- Choice of tools plays an important role in plumbing. The right approach with the right tool in hand can make things easy for us.
Having known about the basics, it’s the time to learn a few things about kitchen plumbing jobs:
Installing a New Kitchen Faucet:
Replacing a faucet is one of the easiest tasks in plumbing. First of all, disconnect the pipelines to the sink and place a bucket to catch the water.
- Turn off the water supply.
- With the help of abasic wrench, remove the nuts holding the faucet.
- Clean the sink.
- Place the plastic or rubber stopper over the hole and feed the faucet lines into it.
- From beneath the sink, connect the washer and nuts to it.
- Turn on the water supply and connect the sink.
- Done! Your new faucet is now installed. Check the leakage by turning on the water supply.
Cleaning an Aerator:
The aerator is attached to the faucets and controls the flow of water through it. Plumber Toronto will tell you that Vinegar can be effectively used to clean up the clog in the aerator.
- Remove the aerator from the faucet.
- Take a piece of cloth and add a drop of vinegar on it and clean the aerator by rubbing the cloth over it.
- Rinse the aerator, and it is ready to use once again.
Replacing a Garbage Disposer:
If your garbage disposer starts malfunctioning, it is the time to get it replaced. Oh, Hang on! No need to call upon a plumber. Here’s how you can do it on your own:
- Turn off the electricity.
- Loosen the clamp and bolts of the disposer.
- Rotate the 3-tab mounting ring, supporting the disposer from below.
- The unit falls away. Loose the bolts and pry off the retaining ring.
- Apply epoxy putty on the counter, making a 0.5-inch-thick and 10-inch-long piece.
- Apply it to the drain from beneath and then press the drain softly into the hole.
- Your garbage disposer has been replaced!
Unclogging your Kitchen sink:
‘Does your kitchen sink clog frequently?’
Clogging is one of the most common problems in every household. Well, the solution lies in your home only. Vinegar and baking soda can be your ruthless weapons against clog. Here’s how you can unclog your kitchen sink:
- Pour ½ cups each of vinegar and baking soda to the clog.
- Wait for a few minutes, then follow with hot water.
- Repeat this step until the clog vanishes.
- Your sink is unclogged. Happy dishwashing!
Temporary Repair for Leakage:
Another common problem to be aided with a proper solution.
An epoxy putty is one of the comfortable ways for repairing a leakage. It comes with required instructions.
- Turn off the water supply.
- Before applying the putty, make sure the area is dry.
- Apply the putty on the damaged part and press it.
- Wait until it holds the surface completely.
- Turn on the water supply and check if the repair works.
You are done with the leakage repair. Say ‘bye’ to leakage!
This way you can handle kitchen plumbing yourself without calling the plumber everytime a damage occurs. Be your own plumber!